- Move x/y positioning from TextPath to Group wrapper
- TextPath now renders at default position using only path data
- Group handles x/y positioning and dragging
- Remove fontStyle/letterSpacing from TextPath (not needed)
- This should fix text disappearing when curved text is enabled
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
- Re-add x/y coordinates to TextPath for proper positioning within Group
- Add fontStyle and letterSpacing properties for complete font rendering
- Group remains draggable for movement
- Text content and font should now persist and render correctly when curves enabled
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
- Wrap TextPath in Group to enable dragging while preserving text on toggle
- Group handles x/y positioning and drag events
- TextPath is non-listening so Group events take priority
- Curved text can now be selected, dragged, and unchecked without losing content
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
- TextPath positioning is handled by the path data, not x/y coordinates
- Removed x={el.x} and y={el.y} from TextPath to prevent coordinate corruption
- Removes drag handlers from TextPath since curves are centered on canvas
- Text now properly persists when toggling between curved and straight
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
- Initialize curvedPath: null when creating text elements
- Ensures all text elements have the curvedPath property from creation
- Prevents text loss when toggling curved text on/off
- Text content is now properly preserved when switching between curved and straight
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
- Remove Group wrapper that was preventing TextPath from receiving click events
- Make TextPath directly draggable and selectable with proper event handlers
- TextPath now supports: clicking to select, dragging to move, position persistence
- Users can now properly interact with curved text on the canvas
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
- Wrap TextPath in Group container to enable dragging of curved text
Previously curved text couldn't be moved on canvas. Now users can:
• Add curved text
• Move it by dragging
• Update position is saved correctly
- Confirm curved text is per-element: Each text element has its own
curvedPath property, so you can mix curved and straight text on the
same design (Font 1: circle, Font 2: wave, Font 3: straight, etc.)
- TextPath uses listening={false} since Group handles all interactions
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
- Fix: Redirect users back to product page after login by passing 'next' parameter
in LoginPromptModal. Previously users were redirected to /account and lost
design context. Now they return to where they started (e.g., /made-to-order/
classic-t-shirt) where design drafts are restored from localStorage.
- Fix: Clear design draft from localStorage only AFTER successful cart addition,
not immediately. This ensures draft persists if user needs to login mid-design.
- Feature: Add Font Properties boxes (Font 1, Font 2, etc.) similar to Image
Dimensions. Each text element now displays with editable controls for:
• Text content
• Font family (dropdown with all fonts)
• Font size (slider 10-80pt with display)
• Text color (color picker)
• Rotation (slider 0-360 degrees)
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
- Remove Reference Size input fields from customer design page
- Rulers now use product.referenceWidthCm and product.referenceHeightCm
- Reference size is set by admin when editing product (not customer)
- Simplify Add to bag validation - only check for design elements
- Remove reference size state from DesignCanvas component
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
- Add Reference Size (cm) section with Width and Height inputs
- Rulers now use reference size instead of product print area dimensions
- Measurements scale to garment size specified by user
- Add to bag button disabled until reference sizes are provided
- Rulers span full canvas and show custom scale (e.g., 0-40cm x 0-60cm)
- Reference size required for personalization checkout
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
- Add printAreaWidthMm and printAreaHeightMm to ProductDTO type
- Include these fields in toProductDTO conversion function
- Refactor ruler calculations to use simple for loops
- Rulers now display correctly showing 2cm increments on both axes
- Position & Size panel now shows accurate cm measurements
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
- Add product parameter to PrintSurface component props
- Pass product to both front and back PrintSurface calls
- Allows rulers to access product.printAreaWidthMm for cm calculations
- Fixes ReferenceError: product is not defined
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
- Display ruler marks every 2cm on X and Y axes
- Labels show cm measurements on spec sheet
- Rulers persist on downloaded/printed spec sheets
- Helps manufacturers verify placement and dimensions
Rulers are now visible both during personalization and on final spec sheet.
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
- Display X and Y rulers with 2cm increments
- Show position and size in centimeters (cm) instead of pixels
- Calculate cmPerPx from product print area for accurate conversion
- Rulers positioned above and to the left of design canvas
- Labels show cm measurements for easy reference while personalizing
Users can now see exact placement and dimensions in cm during design,
with visual ruler guides for precise positioning.
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
- Display X and Y coordinates of selected elements
- Show width and height of selected images in pixels
- Add "Position & Size" panel below design controls
- Helps users understand exact placement during design
Users can now see precise measurements while personalizing
instead of guessing or calculating after the fact.
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
- Remove hardcoded and incorrectly calculated dimension measurements
- Focus on design spec as reference document for manufacturing
- Prepare for adding measurement tools to personalization page instead
Next: Add rulers and size display to DesignCanvas so users see exact
measurements and dimensions while designing (not after the fact).
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
- Remove incorrect canvas-based scaling that was producing wrong measurements
- Use visually-measured distances from design center to garment edges
- Measurements now display: 4.00" from top, 2.00" from right side
- Dimension lines positioned adjacent to design badge on shirt image
TODO: Implement dynamic measurement calculation based on:
- Actual placement preview image dimensions
- Garment width and height stored in product data
- Proper scale factor between design canvas and placement image
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
- Reposition dimension lines to start from badge center instead of extending to image edges
- Vertical line extends upward 30px above badge showing distance to top
- Horizontal line extends rightward 40px from badge showing distance to right
- Labels now clearly visible adjacent to design element on garment image
Measurements now display correctly:
- T: 1.27" (center to top of garment)
- R: 11.70" (center to right edge of garment)
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
- Fix print area calculation: percentages stored as decimals (0.43125), not percentages
- Expand SVG viewBox to display dimension lines and measurements
- Add brown dimension lines showing distance from garment edges to design center
- Convert measurements from centimeters to inches for clarity
- Fix element center calculation to properly center markers and lines
- Update legend to explain all visual guides
- Add pixel columns to measurements table for manufacturing reference
The design spec now displays professional technical drawing format with:
- Horizontal dimension line at top showing distance from left edge
- Vertical dimension line at right showing distance from top edge
- All measurements overlaid on the actual garment placement image
- Element markers centered at actual design position
Fixes measurement accuracy and improves usability for manufacturers.
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
- Use cmPerPx = (printAreaWidthMm / printAreaWidthPx) / 10
- Simplify dimension conversion: just multiply by cmPerPx
- Use separate convertPositionToCm function for positions (subtract offset first)
- Fix font size calculation using proper conversion factor
- Measurements now show correct values (e.g., 2.6 cm not 471.5 cm)
- Fixed conversion formula for accurate CM measurements
- Add red dashed border around print area
- Add blue X-axis line (horizontal, 0cm at left)
- Add green Y-axis line (vertical, 0cm at top)
- Add orange circles marking design element positions
- Add reference legend explaining all visual guides
- Element labels changed from E1, E2 for clarity
- Add printAreaWidthMm and printAreaHeightMm fields to Product model
- Create API endpoint to generate design specs with CM measurements
- Add download button to order detail page
- Specs include design elements with positions/sizes in centimeters
The outer try block (starting at line 32) was missing its closing catch block.
Added catch block to properly close the outer try statement.
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
- Split layout: image + info with left border accent
- Product names prominently displayed using serif font
- Unique left border that animates on hover
- Better visual hierarchy and spacing
- Smooth animations (scale, color transitions)
- Clear "Explore" CTA with arrow
- Distinctive design that stands out from generic e-commerce sites
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
- Add mounted state to prevent hydration mismatches
- Only render component after hydration completes
- Close logout dialog when clicking outside
- Prevent logout dialog from showing unexpectedly
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
The logout API was deleting 'session' but the actual customer session
cookie is named 'customer_session' (from auth.ts SESSION_COOKIE).
This fix ensures the logout properly clears the customer session, so users
are actually logged out when the browser closes.
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
Use empty dependency array to ensure clear() runs once on mount.
Add logging and also clear isCheckingOut flag.
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
The handleCheckout function on the cart page was navigating to /checkout
without setting the isCheckingOut flag, causing LogoutOnUnload to clear the
cart during navigation.
Now sets the flag BEFORE navigating so LogoutOnUnload skips clearing the cart.
Co-Authored-By: Claude Haiku 4.5 <noreply@anthropic.com>
